Temperature – HumIdIty Carbon DIoxIde Ethylene TransmItter
TechnIcal SpecIfIcatIons
| Inputs |
|---|
| Carbon Dioxide Sensor (NDIR) Module |
| Range of Measurement: -40…+120 C |
| Degree of Accuracy: ± 0.3 C |
| Response Time: ± 0.1 C |
| Lifetime: 10 Year |
| Temperature |
| Range of Measurement: -40…+120 C |
| Degree of Accuracy: ± 0.3 C |
| Repeatability: ± 0.1 C |
| Humidity |
| Range of Measurement: 0-100 %rH |
| Degree of Accuracy: ± %2 %rH |
| Repeatability: ± %0.1 %rH |
| Analogue |
| 4…20mA / 0….20mA/ 0….10V |
| mA with scale by user / V with scale by user |
| Modbus |
| RS485 Modbus RTU 1200-115200 range of baudrate |
| Relays: 1 units 220 V 3A AC |
| Display: 2×16 Cog LCD Display |
| Button: 4 Control Button |
| Power Supply : 10-32V DC 12-32V AC |
| Power Consumption: 2,8W |
GNT-250 / GNT-251
Ethylene, Carbon dioxide, temperature, humidity and dew point can be read on device in the same time
• All parameters are able to read from another device by analogue output
• Whole parameters able to read and write by modbus protocol
• Parameters which we wants, able to shown on Cog LCD display
• There is a audible warning system on device
• Warning system can works which parameter we set
• Alarm and warning output are configurable by relay output value what we wants
• Buttons are able and suit for surfing on device menü
• Carbon dioxide can be read with PPM and % when setting change on menu
• Temperature and dew point units can be read via C and F
• Alarm status can be transferred to the user via LED
